LED walls & screens
Fine-pitch indoor walls for general sessions, booths, and broadcast sets, curved or flat.

Indoor fine-pitch, outdoor, transparent, and floor LED, delivered with processing, a build crew, and an LED operator. One quote covers the panels and the people.
Book individual technicians against your call sheet, or hand us a managed technical scope with a production manager who owns check-in, issues, and timesheets.
Fine-pitch indoor walls for general sessions, booths, and broadcast sets, curved or flat.
5,000–6,000-nit outdoor-rated panels for outdoor stages, pool decks, and daylight activations.
See-through mesh, LED strips, and 3D pixel drops for scenic and immersive builds.
Walkable floor tiles for stages, runways, and interactive activations.
Brompton and NovaStar processing, scaling, multi-input layouts, and redundant signal paths.
LED techs to build, map, calibrate, and operate, plus a clean strike and cabinet count.
Pick a panel, or send your wall size, viewing distance, and location and we'll recommend the pitch and package. Specs are manufacturer ratings; quantities and availability are confirmed with your quote.
Walls for general sessions, booths, broadcast sets, and close viewing.
610 × 343 mm 16:9 cabinet · 384 × 216 px · 800 nits · 3,840 Hz · HDR10 · 160° / 140° viewing angle
496 × 496 mm · 256 × 256 px · 1,100 nits · 3,840 Hz+ · 3,000:1 contrast · IP65 with GOB pixel protection
500 × 500 mm cabinet · 600–1,200 nits · ±5° concave / convex curving
500 × 500 mm cabinet · 1,800 nits · 6,000:1 contrast · Black SMD LEDs · up to 10° concave
Black LEDs for high contrast · Magnesium alloy frame · Flicker-free on camera
5,000:1 contrast · Black anti-glare LEDs · Magnesium alloy construction
Daylight-ready panels for outdoor stages, pool decks, and activations.
5,000 nits · outdoor rated · 1000 × 1000, 1000 × 500, 500 × 500 mm · Wind loads up to 20 m/s
600 × 1200 and 600 × 600 mm · 6,000 nits · 3,840 Hz · IP65 · Carbon fiber frame · concave / convex
Outdoor rated, non-transparent · Standard and touring frames · Fly or ground-stack
1200 × 1200 mm · 70% transparent · Wind resistance up to 20 m/s · Builds up to 24 m tall
See-through mesh, strips, and pixel drops for scenic and immersive builds.
23% transparent · 1×1 and 1×2 tiles · Magnetic assembly · curveable
600 × 1200 mm · 40% transparent · 5,000 nits · indoor / outdoor · Carbon fiber frame · 6.8 kg
900 mm LED strip · 6,000 nits · Indoor and outdoor · Daisy-chain 14 units per feed
300 mm strip · 1,200 nits · IP65 rated · Pixel-level mapping
3D pixel drops · 360° viewing · 2,000 nits · IP68 · 2.4 m strings, 8 tubes each
Walkable floor tiles for stages, runways, and interactive builds.
609.6 × 609.6 mm floor tile · 800 nits · indoor · Deep Black, Mirror, or Matte finish
500 × 500 mm · 104 × 104 px · 4,500 nits · 3,840 Hz · IP65 front / IP54 rear
500 × 500 mm floor tile · Glass or durable covers · Triangle, 90°, and cube builds
Every wall ships with processing matched to its size and inputs, plus a backup plan.


| Brompton Tessera SQ200 | Up to 36M pixels and a full 8K canvas from one unit; dual 100G ST 2110 / IPMX |
|---|---|
| Brompton Tessera SX40 | 4K processor, about 9M pixels at 60 Hz; HDMI 2.0, 12G-SDI, four 10G outputs |
| Brompton Tessera S8 | 4K60 input, eight 1G outputs at 525K pixels each; HDR and ultra-low latency |
| Brompton Tessera M2HD | Four outputs at up to 500K pixels each; broadcast-quality scaling |
| NovaStar MX40 Pro | Up to 9M pixels, four 4K layers; HDMI 2.0, DP 1.2, 12G-SDI; 20 Ethernet + 4 fiber outputs |
| NovaStar MCTRL 4K | 4096 × 2160 input, up to 7680 px wide; 16 Ethernet + 4 optical outputs; HDR |
| NovaStar NovaPro UHD Jr | All-in-one processor and switcher; 8 inputs, 8.3M pixels, 4K60 in and out |
| Colorlight Z6 | Splicer, processor, and sender in one; 8.3M pixels; SDI, HDMI 2.0, and DVI inputs |
| ROE Evision HD101 | 16 sending cards; 12-bit input, 18-bit output, 14-bit color calibration |
We deliver and build LED at every major venue on and off the Strip.
Hotels and convention centers often have exclusive vendors for rigging and power. We coordinate with them so your wall is flown or ground-stacked to venue rules and ready when power arrives.

We'll tell you honestly what we can cover and how fast. Urgent requests go straight to a person, not a form.
From small AV setups to full-scale productions, our team brings the same standard to every call. Client names, booth locations, and floorplans stay private.
Graphics, switching, and playback operators running the show from the control table.
Booth AV, displays, and technical labor for trade show floors.
Skilled professional contractors who get your show built and dismantled safely and efficiently.
Every successful event starts with a skilled and professional crew. Our systems handle the paperwork, scheduling, and check-ins — so the only thing you manage onsite is the show.
Co-founder led
Joe Grothe and Zack Harper work your booking directly — sales and operations, not a call center.
GPS-verified
Crew clock in on our app, which confirms they're at the venue at call time.
Before day one
Contractor agreement, liability release, W-9, and ID collected before the first call.
Call or text
Shift invites and call-time reminders go out by text. Reach us at (725) 216-2414.
Beyond labor, PTES delivers the full production stack — so one call covers it all.
Send your wall size, dates, and venue in the form — or contact us directly. We reply with named technicians, rates, and a call sheet.